RtGTO / Help center
Back to website中文
Help center
Hand analysis

Analyse preflop actions by seat and stack

Read opportunities, GTO comparisons and trends, then inspect the hands behind a statistic.

On this page

Choose a table

Open Hand & Action Analysis → Preflop Analysis. The position matrix follows the selected stack band and includes steal/defence and re-raise metrics alongside basic entry and raise statistics. The pressure and specialist tables use their own scopes. Check each heading and the cluster scope; denominators and stack coverage can differ.

Stack bands and seat groups

MTT bands in BB are: 10 below 15; 20 from 15 to below 30; 40 from 30 to below 60; 80 from 60 to below 90; and 100 at 90 or above. Cash uses the 100 band. Changing bands clears selected rows in the upper table.

EP combines EP, UTG, UTG1 and UTG2. MP combines MP, LJ and HJ. The remaining columns are CO, BTN, SB and BB. A position column can therefore represent several seats.

Read frequencies, opportunities and targets

Frequency generally equals qualifying actions n ÷ valid opportunities m × 100. Read opportunities and source status first. Missing values, small samples and unavailable sources are not 0%.

For a GTO comparison, hover to inspect matching conditions, reference coverage and deviation. Metrics without a supported benchmark do not acquire a target automatically; above target does not mean better. A reference aggregated across stack depths depends on opportunity weighting rather than solving every hand exactly.

Select rows to chart cumulative changes as hands accumulate; use Ctrl, Shift or drag selection to compare rows. Upper-table trends follow the stack band; lower-table trends use the full filtered pool. Points are normally sampled every 10 hands up to 10000 hands and every 100 hands for larger samples, with the final change point retained.

Inspect related hands

Right-click a value and select Show Hands. A total uses that table's scope; a position cell also restricts seat and stack band, while a lower-table IP/OOP cell restricts relative position. Use the list to inspect matching actions, not to infer the total opportunity count.

Metric definitions

Position matrix

Position matrix
#MetricAbbreviationDefinition and eligible opportunities
1Voluntarily put money in potVPiPVoluntarily put money in pot rate among hands where Hero made a preflop decision; big-blind walks are excluded.
2Preflop raisedPFRPreflop raise rate when Hero can raise above the current live price against a live opponent with chips to continue.
3Raise First InRFIHero raises first into an unopened pot. The rate uses first-in opportunities.
4Open RaiseORHero makes the first preflop raise. This includes a raise after limpers and excludes a later re-raise.
5Called preflop raiseCPFRHero calls a preflop raise. The rate uses eligible preflop calling opportunities.
6Call Open RaiseCORThe denominator is opportunities where Hero's first preflop decision faces the first raise and no player has called it; the numerator is Hero's calls in those opportunities. Branches where Hero checked earlier, overcalls, squeezes, and multi-raise branches are excluded.
73Bet Preflop3Bet3-bet frequency when facing a preflop raise.
8Direct 3Bet PreflopD3BHero makes the first re-raise after one open raise and before another player calls. The rate uses direct 3Bet opportunities.
9LimpLimpHero voluntarily calls before any raise from a non-blind seat. Small-blind completions and big-blind checks are excluded. The rate uses eligible limping opportunities.
10Unraised call / blind completionURCHero calls an unraised pot or completes the blind. The rate uses eligible unraised-call opportunities.
11Fold to 3-bet preflopF3BHero folds after facing a preflop 3Bet. The rate uses eligible fold-to-3Bet opportunities.
12Folded to 4-bet preflopF4BHero folds after facing a preflop 4Bet. The rate uses eligible fold-to-4Bet opportunities.
13Opener 4BetO4BHero made the first raise, no player called it, then faced a 3Bet and made a 4Bet.
14Opener Fold to 3BetOF3BHero made the first raise, no player called it, then folded to a 3Bet. Squeeze branches are excluded.
15SqueezeSQZHero re-raises after an open raise and at least one call. The rate uses eligible squeeze opportunities.
16Fold to squeezeF2SQZHero folds after facing a preflop squeeze. The rate uses eligible fold-to-squeeze opportunities.

Pressure table

Direct3Bet, F3B, H2nLimp, UnraisedCall, F4B, SQZ and F2SQZ use the corresponding definitions above. D3B / Direct3Bet, Limp / H2nLimp and URC / UnraisedCall are different abbreviations across the two tables. C3B counts calls facing a 3bet; LF counts folds after limping. Each uses its own eligible opportunities.

AI analysis

Open the page's AI analysis action and check AI account and credit. Generate a fresh result after changing the sample, and assess suggestions against opportunity counts and actual hands.

Missing targets or data

For a missing GTO target, inspect strategy coverage and matching details. Imported action statistics remain separate from that target. For an unexpected percentage, check the table's stack scope, n/m and related hands before interpreting a change.

Save and apply a cluster scope

Above the tables, choose New scope in the cluster-scope bar. Select available tournament type, speed, buy-in tier, effective stack, table size, players dealt in or starting-hand category conditions. Check matched hands, then save and apply. Values within a dimension use OR; different dimensions use AND.

A saved scope limits both preflop tables and their trends. Check the active scope after switching CASH/MTT. All hands removes this page's cluster restriction while keeping top-level filters. Removing a scope deletes its configuration, not hands.

Steal, defence and re-raise metrics

Additional rows include ATS, FSTL, 3B STL, Cold call, C4B, 5B, LC and LR. Inspect each definition for position, prior callers and action eligibility. Specialist matchup tables have their own scopes; their rates are not directly interchangeable with global rates. Check opportunities and right-click for qualifying hands.

Not every metric has a GTO target. Missing references do not invalidate observed rates. For individual decisions, use Preflop Correctness and replay.

Suggested guides
    No matching articles

    Try fewer words or search all categories.

    Contact support
    Help center
    Contact support ↗Back to website